31 May, 2006

Dendrobium Orchis: I-Field Gen

Added a bit of detail to the body and the I-Field Generator. The detail is beginning to look more like a custom job than a model with any sort of accuracy. Oh, well... at least it looks close ;)
ifield i-field sandrum dendrobium 3d

Labels: , ,

29 May, 2006

Dendrobium Orchis: Body 2

Cripes, I finally have something that's not horrible looking. After many retries, it's starting to come out ok. Still many things that aren't correct about it though. Not giving up on this bastard.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

28 May, 2006

Dendrobium Orchis: Body 1

Whew!!! I had to sit down with a pencil and paper to figure this one out. A little planning and some days later, the body is coming out ok. I figured that this would be the most difficult part, especially in that I wouldn't know where to start from. Anyway, it's coming along ok. Now I'm just adding some detail to make it look busy. The orchis is so organicy...
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

20 May, 2006

Dendrobium Stamen: Complete

Aside from an obvious rigging error (in the lower legs), the GP03S is done being rigged and clean textured. Now on to the Dendrobium Orchis
CG Dendrobium Stamen orchis gundam 3D lightwave mesh complete sandrum

Labels: , , , , ,

19 May, 2006

Dendrobium Stamen: Folding Shield

CRIPES!! I haven't updated in days! I'm such a lazy bum! Ok, the folding shield. It surely will fold when the rigging is done ;)
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

15 May, 2006

Dendrobium Stamen: Beam Rifle

Finally getting my lazy arse around to the beam rifle. I should have had this entire Gundam colored already, but sitting back on the couch sure is nice once in a while. :)
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , , ,

13 May, 2006

Dendrobium Stamen: Booster 2

Still on it, just being lazy. The GP03S waist booster is coming along.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

10 May, 2006

Dendrobium Stamen: Booster 1

Working on the GP03 booster/connector to the Dendrobium Orchis. Still in progress of course ;)
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

07 May, 2006

Dendrobium Stamen: Legs 1

Whew, roundy legs kind of bite in the first place but having to cut into them and add extra stuff lengthens the amount of time it takes for me to finish. Almost done. Need to get the ankles and leg sensor.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

06 May, 2006

Dendrobium Stamen: "Gimmick" Arms

The gimmick arms used to retrieve weapons from the Orchis' weapons drawers are functional..though not very pretty yet. :p
gimmick gp03 stamen 3d

Labels: , ,

05 May, 2006

Dendrobium Stamen: Arms

And then the GP03 arms, including the gimmic system for pulling out the weapons drawers from the Orchis.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

Dendrobium Stamen: Waist

The GP03 waist is done. I think that I'll wait for the waist boosters for last along with the Dendrobium booster/clamps on the back of the body.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

04 May, 2006

Dendrobium Stamen: Body

Moving along with the GP03 body. At this point I've only opted for the solid, panoramic cockpit configuration. I'll try for the core fighter configuration after I finish the armament.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , ,

03 May, 2006

Dendrobium Stamen Orchis Project

Starting the Dendrobium project!! YAY!! Ok, so the Dendrobium is what I'll refer to this in a kind of off-center way, though when I refer to a specific model, I'll call the mobile suit the "STAMEN" or the "GP03" and the Mobile Weapons platform the "ORCHIS". This is one of my favorite Gundams in the sum of the Gundam Universes (actually mine is the GP01 Zephyranthes)... Anyway, without wasting any more time..



And the modelling of the Dendrobium STAMEN head.
dendrobium gp03 stamen orchis gundam 3d mesh sandrum

Labels: , , ,

01 May, 2006

Archangel: Sorta Done

And the Archangel is sort of done. Really it's just that time is up for this one for now, so here it is thus far.
CG Archangel 3D gundam lightwave sandrum

Labels: , , , ,

Archangel: Color 1

Screwing around with hull textures...
archangel gundam seed 3d test color lightwave

Labels: ,

Archangel: Wing

Finally, the modelling is pretty much done with this wing. Now to bump map and texture the bastard.
archangel wing gundam seed 3d lightwave sandrum

Labels: ,