07 January, 2010

Xamel: Textin

I'm just jumping around with all sorts of different things I've been doing for the past...oh whatever long years. I wanted the Xamel to be a little dirtier than the rest, seeing as how it scuffles along the ground all the time. Still needs work on some of the texturing and some more displacement maps...some of it is just too flat.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

28 October, 2009

Xamel: Cannon 2 - Deploy

And, just a look at the gun mounted and unfolded. Bout time to finish up the spare detail I've missed and then hit that shiny blue frame Astray!


mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum



mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

Xamel: Cannon 2

The cannon is mounted somewhat towards the machine's right side. There's some collision going on with the end of the cannon.


mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

Xamel: Cannon 1

Got a nice little start on the cannon. Trying to use what I can find on katoki's version of this cannon, but I might borrow from a previous, optional armament made by Windfall that could assist in various places.


mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

Xamel: Rear Cab 3

The detail on the bottom is somewhat there, but still lacking. The support beam that connects the bottom layer of the rear cab to the top isn't in place correctly. Most of what I've been able to see in the way of detail seems to squeal of panel lines and the like. I may just go ahead and bump map that stuff in there instead of modelling it. I'll flip a coin on that one.


mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

Xamel: Rear Cab 2

Haven't much in the way of detail yet, but it's getting there. I had to guess on the slope of the curve that isn't isn't viewable from the side, so it might be quite off. But I guess it would have to be at least semi-level to support the cannon in on it. Got some lumps to hammer out in it though. There are supposedly some crate looking weights on the inside that act as a counter balance or support stand. I'm not sure which, but I threw in some makeshift weights for good measure.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

27 October, 2009

Xamel: Rear Cab

Some things that made me sit back a bit, the xamel's cannon is mounted on the hover cab in the rear and appears to be detachable, at least for some sort of toy gimmick. Trying to build some of that gimmick but fallin' a little short on detail.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

Xamel: Arms 1

Got a makeshift missile launcher attached to the backside. I used an early version of the Zaku II's arms to get the shoulder plate and upper arm started for the Xamel. Working from there, I tried to get close to what I believed the arms to look like. Not exactly the same, but similar enough. The lower arm was where I was going to use the rick dom's, but the geometry proved too different and so I started from scratch. The hands are mostly from scratch, but I have to improve the fingers. I'd like them to look more ET-ish -- that is, bonier at the finger joints. Haven't gotten any farther on the legs.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

26 October, 2009

Xamel: Legs 2

Came back from Tokyo to try to get these legs in. Some of the foot uses modified parts of the Nightingale while the leg and innards are a mish/mash of the zaku II and RickDom. The soft skirt was one that I wanted to make where I could employ cloth dynamics for the sag. It wasn't coming out well since parts were still pudging out of the armor where it shouldn't. I went back and hard modeled them instead, but the sag is still coming out in certain areas.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

16 October, 2009

Xamel: Legs 1

Moving cautiously on the legs as they aren't built the way I thought they might be. Thinking of using clothFX on the sand shielding skirt so that the cpu computes the "sag" instead of me modeling it...

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

14 October, 2009

Xamel: Body 3

The front skirts are kind of there. I had to guess that they would be bulkier than most of the zeon/federation suits I've made thus far, what with all the skimming it would do on terrestrial surfaces. Not much to see in the rear. Haven't gotten to the missile launcher just yet. The legs and rear skirt: I'm thinking that earlier mesh saves of the nightingale might assist with that rear skirt a little, while the legs could be restructured versions of the rick dom's. Not sure, I'll see what I can pull from them. At any rate, the stuff done now needs to be smoothed out a wee bit to get some of the sharpness out of it. No need for engineers to cut their bodies in half if they slip off the armor by mistake, eh.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

13 October, 2009

Xamel: Body 2

Moving through it, but not beautifully. Most of the rear I'm kind of up in the air about so I was using the zaku and hyaku shiki for help getting things through.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

12 October, 2009

Xamel: Body 1

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Finally getting to this one. The xamel is one that I've been procrastinating on for a long time. The Apsalus aside since it's an MA, the Xamel is another one of my favorite Zeon designs for no really good reason. Wanted to make it for a while but never did, here's to a good start.

Hopefully I'll finish this one and not leave it here for another 2 years...

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels:

14 August, 2008

Rick Dom / Xamel -> GO!!

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum


Looking at the roster I've got to the left there, it becomes obvious that there is a severe lack of Zeon/Neo Zeon/Axis MS present, especially compared to the amount of "Gundam" suits. So I thought I'd try to rectify that Zeon handicap a little. Actually, my wife thought of it and I'm going to rectify it. She seems to lean more towards axis/zeon suits.
I really enjoyed watching Gundam 0083 (mostly for the bg story and mech. The "love story" is quite bad) and in that spirit I figured on trying some MS that looked very little like a "Gundam".
The Xamel is not an obvious choice, but it's one I haven't seen many people make. I thought it might be a fun one to go through, but I didn't know where to start until the Rick Dom popped into my head. I thought that perhaps it might be feasible to build that Dom and fashion parts from the Dom into the Xamel and repair as necessary.

M'kay, so the Rick Dom's head start.... but I guess you knew that ;p Got a few smoothing errors but nothing to be too concerned about at the moment.

mobile suit gundam 0083 stardust memories rick dom xamel 3d mesh cg sandrum

Labels: ,